S7-5-E-P FIBRE-OPT PNP M8

Name: S7-5-E-P FIBRE-OPT PNP M8
SKU: 950551030
Availability: BackOrder

S7-5-E-P
Photoelectric Sensor Red LED emission Fiber optic amplifier with display - M8 connector pnp

Article no.: 950551030

Orderable item

Overview High-resolution models with integrated display12 bit resolution and 50 µs response timeTrimmer or teach-in modelsWide range of accessory fiber optics4 wire NO/NC output or Remote teach input

Technical Features

Detection properties

Nominal sensing distance	100mm
Sensitivity adjustment	Teach-in

Application

Function Principle	Optic fiber amplifier
Description	Compact case with display
Optic position	axial
Functions	Optic fiber amplifier

Outputs

Output type	PNP L/D selectable
Output Function	L/D selectable
Switching frequency	5Khz (fast speed)
Response time	100µs (high speed)

Electrical data

Operating Voltage	12...24VDC ± 10%
No-Load supply current	≤ 50mA
Load current	≤100mA
Output voltage drop	≤2V@Iload=100mA
LED indicators	yellow (output state) green (stability, delay, speed led) green/red (Read/error)
Short-circuit protection	YES
Reverse Polarity Protection	Yes
Emission	LED Red (670 nm)
Interference to external light	according to EN 60947-5-2 : 2020
Impulsive Overvoltage Protection	Yes
Insulation resistance	>20 MΩ 500 Vdc, between electronics and housing
Contact resistance	500 Vac 1 min., between electronics and housing

Mechanical data

Dimensions	10x40x65
Housing Material	ABS(Housing), PMMA (Optics)
Connections	2m cable
Active Head Material	PMMA
Storage temperature	- 25°C…+70°C
Material	Plastic ABS / PC
Diameter/Dimension	Cubic

Test/Approvals

Approvals	CE cULus
Shocks and vibrations	0.5 mm amplitude, 10 … 55 Hz frequency, for every axis (EN60068-2-6)

Generical Data

Dimensions	10x40x65
Operating Temperature	- 25°C…+ 55°C (Without freeze)
Mechanical Protection	IP67 with cover